DDNS with HTTPS
Hello, I use a ssg5 with the firmware 6.3.0R23. It is not possible to connect to my DDNS Service with HTTPSI get the error message DDNS: connect errorsocket creation failed The root and intermediate...
View ArticleSSG 140 transparent network between multiple VPN subnets
Hi Experts, I have some problems setting up my SSG140 to do as I want it to do. Would appreciate if someone can contribute some knowledge and expertise. Current setup:Server_A - Interface1...
View ArticleForward public ip to device directly attached to ssg interface
Greetings to all the experts.I am a self-taught and I am not much netscreen expert. I have one isp router (A), one SSG140 and one other provider router (B) I should assign 1 Public IP to router (B)...
View Articlewild card ssl cert installation on SSG140
Hi; I have a SSG 140 appliance, and I install a wild card ssl cert (.cer) file to my SSG 140. 1. How can I make it as default ssl cert, whenever I enter https://myfirewall.company.com domain, and I...
View ArticleCan I use RADIUS on Windows 2012R2 for Juniper SSG140?
Hello; Instead of using LDAP, can I use RADIUS setting on Juniper SSG140 to authenticate my SSLVPN user to Active Directory which is Windows 2012R2. Can anyone direct me to the right place to find the...
View ArticleHow to force SSG FW to generate SHA-256 cert
Can anyone point me to the process either via cli or from the gui (not NSM) to generate a CSR for an SSG/ScreenOS firewall to use a SHA-256 algorithm? Thanks
View ArticleVOIP traffic
Dears, i would appreciate your help with my case: i have a remote public IP for call manager, i need to grant the PCs on my LAN PCs to access it, so i have added a route and policy to allow the access...
View ArticleClik here to view.
occasional problem
Hello everyone,i've a customer who have 2 pair of isg1000 in cluster acting as front and backend for a very big company.This summer i got a problem on the backend and 20days ago i got the exact same...
View ArticleWhere can I find the system logging severity level for each trap message on...
I would like to know where can I find the system logging severity level for each trap message on ScreenOS. Following hyperlink describes trap types for ScreenOS....
View ArticleCisco's call-home analog in JunOS/Netscreen OS?
Hello All, I was checking if there is a possibility to enable of automated reporting for JTAC in case of any crucial events occure in the appliance and seems like there is no such possibility. Can you...
View ArticleSSG140 Different Interface Routing and VLANs
Hello, I have had a couple of SSG140's running 6.2.0r8.0 for a couple of years in a simple configuration, however I need to change this. I am not a CLI guru at all and manage to do everything I need to...
View ArticleWhat`s the OID of interface flow in bps or how to parse "nsIfFlowInByte" to...
I would like to get the number of bits per second(bps) of interface via snmp mib on ScreenOS. I found "ifIn1SecRate" for Junos. But I just found "nsIfFlowInByte" for ScreenOS and I got its value like...
View ArticleClik here to view.
SSG 320M :: Booting stop situation
1) no problem : console cabel , putty, keyboard because, i used it. another product. for example, ssg5 etc 2) i pushed reset buttion very long time. but, still same 3) any other key doesn't input in...
View ArticleRoute based VPN - packet dropped, no route - problem
I have two Juniper SSG5 with the same firmware version 6.3.0r23.0. A route based VPN set up between the two that is seemingly working. SA - status is active and link is up. The tunnel is stable. On...
View ArticleL2TP over IPsec to Microsoft RRAS
I have a Routing and Remote Access Server behind my SSG and I would like to use it for L2TP VPN. When I try to forward UDP 500 using VIP on my interface, I get a message saying it's not supported, 500...
View ArticleRemove a VPN Tunnel
Hi, I 'simply' need to remove a VPN tunnel from my SSG 140 firewall. When I go to the VPN>Auto Key and hit rrmove on the tunnel I need to delete, I get the following message... This VPN has tunnel...
View ArticleMIP on one of the trust network IP device for DMZ access
Hello, It a SG140 FW. I have a device in trust network which I want it to be seen by DMZ device by using MIP 1 to 1. I don't want to use any routing between DMZ and trust network. Anyway to do...
View ArticleSSG Firewall log compression transfer.
Hi, On the ssg 550 firewall, Ftp or otherwiseCan I send the log to another server as a compressed file? Please answer me. Thank you.
View ArticleSSG5 Performance Issues
Hello New to the foruma. I have issue when trying to transfer larger files like 2 to 3 Mbps through different zones in the SSG5. I did a get inter eth0/3 and see below it shows a half-duplex...
View Article[ASK] apply pbr on sub interface Juniper ssg550
Hi, I about to configure PBR on my customer ssg550 production device,so it seems i need apply the PBR on subinterface. is anyone has ever tried configure PBR and apply it on subinterface?is this will...
View Article