ISG2000 6.3.0r16b.0 firmware update to 6.3.0r26
Hi all, I have a Juniper ISG2000 (No IDP) with the version 6.3.0r16b.0, I would like to upgrade the firewall firmware to : 6.3.0r26. What are the changes in the new version? What are the open points?...
View Articleunable to access DVR through ssg5
We are trying to port a dvr through the system to access the cameras and cannot see them here is a copy og the config, hope you can show me where is issue is. the cameras are on port 3777 tcp 3778...
View ArticleSSG5 keeps dropping connection to Shaw modem
Little history have a lihts and water system connected to the juniper which is remotely controlled from another location. The issue is that the connection between the shaw modem and the juniper loses...
View ArticleRoute traffic through VPN tunnel
Hello, Before starting, I need to mention that I have never configured an firewall before and am therefore missing a lot of theory on this topic. I was given the task to configure an SSG-5 for an VPN...
View ArticleVPN Client Tunnel all traffic option does not work
Hello,I have a SSG5 and created VPN connection for the clients, with Shrew Soft client. Followed several tutorials and this one:https://www.shrew.net/support/Howto_Juniper_SSGNow I have a vpn working...
View ArticleClik here to view.
IPsec VPN not passing traffic
Hi, We have two networks that we need to connect with a VPN connection. The remote network is in AWS with the IP range 10.0.0.0/16 and our lokal network has the IP range 192.168.53.0/24. AWS kindly...
View ArticleRoute based IPSEC VPN Config between SSG-550M and Cisco ASA
Hi All, I'm looking for some help and guidance regarding an issue with Route based IPSEC VPN Config between SSG-550M and Cisco ASA. From the get sa output, its A/D, however traffic is passing through...
View ArticleAccess VPN from eth0/0 Untrust
Hi, I'm relatively new to Juniper devices and need a bit of support configuring a routing policy. Our SSG-5 is acting as a VPN-Endpoint and in the past we connected devices to bgroup-0 inorder to...
View ArticleVIP IP Public to ip private remote server cant contacted JUNIPER SSG5
Hi guys,i have ip public 103.244.205.25and then i have ip local : 10.173.1.0/24and this ip remote : 192.168.2.30 between local and remote ip each can ping via ipsec connection. but when i configuring...
View ArticleNSRP Cluster License for SSG-5 home user
Hi! SSG5 ist EOL and ideal for some playing at home with them, you can get them on ebay for 20$ already.Does anybody know how to get a NSRP Cluster license for free? regards Glo
View ArticleCritical error of Scan Manager
Firmware is 6.3.0r13.0.Just received an email alert[00001] 2019-06-25 21:52:43 [Root]system-critical-00554: SCAN-MGR: Check AV pattern file failed with error code: test load db fail on worker load db...
View Articlenetscreen domain name for an ip addr
Hi All,Could you please let me know is there any option in SSG to configure domain name-ip address mapping, so that i can ping some mapped servers using the domain name ? I have seen an option to call...
View Articlel2tp site to site between two SSG
Hello, I am trying to make a l2tp tunnel between two Juniper SSG 320M, using one SSG like server and the other like client but I cannot do that the tunnel works, Do you have any suggestion or guide of...
View ArticleSSG with DLNA between VPN
Hello, We are installing Juniper SSG 320M in different sites, and configuring VPN GRE between them, also We are trying to send multimedia data, through the tunnel of the VPN, with DLNA without...
View ArticleThere is no bridge group interface on ISG 2000
We have an ISG 2000 firewall running 6.3.0r13b.0 that does not have a bgroup interface configure by default, nor have I been able to create one. We need this for a VPN connection, but I've spent a lot...
View ArticleProblems bringing up policy-based VPN tunnel on ISG 2000
Our ISG 2000 is running 6.3. We were trying to get a route-based VPN set up to Azure, but we couldn't get that resolved, so now we're trying a policy-based VPN. It sure looks simple enough, but we...
View ArticleSSG5 Can't access Akamai hosted websites
We have several sites behind SSG5 firewalls that are unable to access Akamai-hosted websites all of the sudden. No changes on our end. The clients will either get a timeout loading the page, no...
View ArticleNeed help disabling SIP ALG on three legacy ScreenOS firewalls
We're in the process of deploying a cloud-hosted VoIP system (Metaswitch) across our enterprise (14 locations). For it to work correctly the only change required on our part is to disable SIP ALG. At...
View ArticleHigh cpu with small amounts of VPN traffic
We're trying to offload VPN traffic from our main firewall with a ISG 2000 running 6.3.0r13b.0 which we pulled out of the closet. This is a route-based VPN, but even with a single copy process started...
View Article