Dear all,
We need to upgrade an SSG550M from 6.1.0r2.0 to 6.2.0r19.0. We did not upgrade bootloader because as the document of Juniper (not required). After upgraded the key successful, we loaded firmware as the instruction of Juniper (use TFTP):
save soft from tftp ip_addr screenos_filename to flash . About 5 mins after, we have seen the log as below:
-------------------------------------------------------------------------------------------
TFTP Succeeded
Save to flash. It may take a few minutes ...platform = 25, cpu = 12, version = 18
update new flash image (0206ca70,15240197)
platform = 25, cpu = 12, version = 18
offset = 20, address = 5800000, size = 15240117
date = 8b25, sw_version = 800031, cksum = d90a903a
Unknown platform type (19)
Wrong software, ignore it.
Done
----------------------------------------------------------------------------------------------
We do not know why, the image is downloaded on the Juniper official.
Kindly help me solve this issue.
Thanks,
ThinhND